Aluminum & Metal Core PCB Capability
Custom MCPCB fabrication with aluminum or copper cores, 1.0–6.0 W/mK thermal materials,
engineering-led stack-up review and controlled production from prototype to volume.
Current Location: Home > Capabilities > Aluminum & Metal Core PCB Capability
Aluminum & Metal Core PCB Capability
Aluminum & Metal Core PCB Manufacturing
Custom MCPCB fabrication with aluminum or copper cores, 1.0–6.0 W/mK thermal materials, engineering-led stack-up review and controlled production from prototype to volume.
Talk to a Thermal PCB Engineer
Aluminum & Copper Core | 1.0–6.0 W/mK Materials | Prototype to Volume | Free DFM Review
Control Heat Before It Limits PCB Reliability
High-power components generate concentrated heat that standard PCB constructions may struggle to transfer away efficiently.
When the thermal path is not properly designed, elevated operating temperatures can lead to component derating, unstable electrical performance, shortened service life and additional dependence on external heat sinks.
AEGIS manufactures aluminum PCB and metal core PCB solutions that combine the circuit layer, thermally conductive dielectric and metal substrate into a controlled heat-transfer structure.
Our engineering team supports material selection, thermal-path evaluation, stack-up review and finished-board manufacturing for power electronics, automotive systems, EV applications, LED lighting, industrial equipment and other thermally demanding products.
What Is a Metal Core PCB?
A metal core PCB, also known as an MCPCB, uses a thermally conductive metal substrate instead of relying entirely on a conventional FR4 structure.
A typical single-sided aluminum PCB contains three primary layers:
- A copper circuit layer
- A thermally conductive and electrically insulating dielectric
- An aluminum or copper metal base
Heat generated by the components passes through the copper circuit and dielectric layer into the metal base, where it can spread across a larger area and transfer toward the housing, heat sink or surrounding environment.
Aluminum is the most widely used metal-core material because it provides an effective balance of thermal performance, mechanical strength, weight and cost.
Copper-core PCB constructions are available for applications requiring a more demanding thermal path, higher current capability or greater localized heat spreading.
Aluminum & Metal Core PCB Capabilities
Capability | Single-Sided MCPCB | Double-Sided / PTH MCPBC | Multilayer / Hybrid Metal-Backed PCB |
| Supported Structures | Single-sided metal core PCB | Double-sided metal core PCB with plated through holes | Multilayer and hybrid metal-backed constructions by engineering review |
| Core and Base Materials | Aluminum core, copper core and direct thermal path copper structures | Aluminum or copper metal core combined with suitable dielectric and circuit materials | Metal-backed hybrid structures using PTFE, hydrocarbon, high-speed or mixed laminate systems by review |
| Typical Applications | Automotive lighting, high-power LED boards, medical equipment, power electronics and 3D-printing systems | Communication equipment, automotive electronics and industrial control systems | Communication, RF, high-speed and thermally demanding electronic systems |
| Finished Board Thickness | 1.0–5.0 mm | ||
| Thermally Conductive Dielectric | 0.5–8.0 W/m·K options, subject to material selection | Based on the selected metal-core and dielectric system | Defined according to the hybrid stack-up |
| Metal Base Thermal Conductivity | Aluminum and copper base options; actual value depends on the selected metal grade | Same as the selected metal substrate | Defined according to the metal-backed construction |
| Registration Accuracy | Down to 0.05 mm | Down to 0.075 mm | |
| Surface Finishes | Lead-free HASL, ENIG, electrolytic gold, immersion tin and OSP | ||
| Back-Drill Depth Tolerance | ±0.20 mm where applicable | ±0.10 mm where applicable | |
| Routing / Forming Accuracy | ±0.10 mm | ||
| Profile / Positional Tolerance | ±0.20 mm | Down to ±0.15 mm | |
| Production Support | Prototype, low-volume and volume production | ||
Capability
Single-Sided MCPCB
Double-Sided / PTH MCPBC
Multilayer / Hybrid Metal-Backed PCB
Requirements outside the standard capability window can be evaluated individually by our engineering team.
Advanced Hybrid Metal-Backed Structures
For projects combining high-frequency, high-speed or multilayer circuitry with thermal-management requirements, AEGIS can evaluate hybrid metal-backed constructions using PTFE, hydrocarbon, high-speed and mixed-laminate systems.
Each structure is reviewed according to the metal-core position, dielectric system, layer count, plated-hole isolation, thermal path, CTE compatibility and mechanical tolerance.
Submit Your Stack-Up for Review
Metal Core PCB Structures
Single-Sided Aluminum PCB
The single-sided aluminum PCB is the most common and cost-efficient MCPCB construction.
The component and copper circuit layers are located on one side, while the aluminum base provides mechanical support and a direct path for heat spreading.
Typical applications include:
- LED lighting modules
- Automotive lighting
- Power-conversion modules
- Motor-control electronics
- Industrial power supplies
- Consumer power electronics
Double-Sided Metal Core PCB
Double-sided metal core PCBs provide circuit layers or component mounting areas on both sides of the structure.
Plated through holes must be electrically isolated from the metal core, requiring controlled drilling, insulation and plating processes.
These boards are suitable for projects that need more routing space or interconnection density than a conventional single-sided aluminum PCB can provide.
Multilayer Metal Core PCB
Multilayer metal core PCB structures combine multiple copper and dielectric layers with an aluminum or copper thermal substrate.
They can support more complex signal routing, control circuitry and power distribution while maintaining a defined thermal path.
Because multilayer MCPCB construction introduces additional thermal, mechanical and lamination considerations, each project is reviewed individually for:
- Layer structure
- Dielectric thickness
- Copper distribution
- Via design
- Metal-core position
- CTE compatibility
- Mechanical tolerance
- Thermal performance
Hybrid Metal-Backed PCB
A hybrid structure combines conventional FR4 or high-performance PCB materials with a metal backing or embedded metal layer.
This approach can be used when the design requires both complex signal routing and localized thermal management.
Hybrid constructions may also help reduce dependence on a separately mounted external heat sink.
Aluminum Core or Copper Core?
Aluminum Core PCB
Aluminum-core PCBs provide a practical combination of heat spreading, low weight, mechanical strength and manufacturing cost.
They are commonly selected for:
- LED lighting
- Automotive electronics
- EV charging systems
- Motor drives
- Industrial control
- Power converters
- Consumer power products
Copper Core PCB
Copper has higher bulk thermal conductivity than aluminum and can provide stronger localized heat spreading.
Copper-core structures may be considered for:
- High-current power modules
- High-power converters
- IGBT and MOSFET applications
- Compact power-density designs
- High-temperature equipment
- Applications with concentrated component heat
Copper-core PCB cost and weight are typically higher, so the choice should be based on the complete thermal and mechanical design rather than the metal type alone.
AEGIS can evaluate both aluminum and copper-core material paths during the DFM and stack-up review.
Thermal Conductivity Is Only Part of the Design
Selecting the highest available W/mK value does not automatically guarantee the lowest component temperature.
Overall thermal performance is also influenced by:
- Dielectric thickness
- Dielectric thermal resistance
- Copper area
- Copper weight
- Component footprint
- Solder-joint quality
- Distance between the heat source and metal base
- Thermal vias
- Interface material
- Heat-sink attachment
- Enclosure design
- Airflow
- Operating duty cycle
A thinner dielectric can improve the thermal path, but it must still provide sufficient electrical insulation and withstand the required operating voltage.
Our engineering review considers thermal conductivity together with insulation, mechanical, electrical and manufacturing requirements.
Engineering Challenges We Help Resolve
Excessive Component Temperature
Localized heat around LEDs, power transistors, MOSFETs, IGBTs and regulators can reduce performance and reliability.
AEGIS helps evaluate the thermal path from the component pad through the copper, dielectric and metal base.
Incorrect Dielectric Selection
The dielectric must transfer heat while maintaining electrical insulation.
Selecting material only by thermal conductivity can result in insufficient breakdown performance, unsuitable thickness or unnecessary cost.
Poor Heat Spreading
A metal core cannot compensate for narrow copper areas, undersized thermal pads or an inefficient component layout.
Our DFM review evaluates copper geometry and the intended heat-spreading path before production.
PTH Isolation From the Metal Core
Double-sided and multilayer metal core PCBs require reliable insulation between plated through holes and the conductive metal substrate.
Hole structure, clearance, resin filling, drilling and plating must be evaluated as one controlled process.
CTE and Lamination Compatibility
Metal, dielectric and copper layers expand differently during lamination, assembly and field operation.
Material compatibility must be considered to reduce the risk of delamination, hole-wall stress and dimensional instability.
Mechanical Machining and Tolerance
Aluminum and copper bases require different routing, drilling and finishing controls compared with standard FR4 boards.
Custom outlines, countersinks, slots and mounting features should be identified during the quotation stage.
Aluminum PCB Prototype and Quick-Turn Support
A thermal-management PCB design often requires physical verification before volume production.
AEGIS supports aluminum PCB prototypes and metal core PCB prototype builds for:
- Thermal validation
- Mechanical fit checks
- Assembly trials
- Component-temperature testing
- Heat-sink interface verification
- Soldering-process validation
- Customer qualification
- Pilot production
Prototype feedback can then be incorporated into a controlled production package covering materials, stack-up, copper construction, machining and inspection requirements.
Request an MCPCB Prototype Quote
From Prototype to Volume Production
AEGIS supports a controlled transition from initial engineering samples to repeatable volume manufacturing.
1. File and Requirement Review
Send your Gerber files, drill data, stack-up, board drawing, copper requirements, thermal targets and expected quantities.
2. Material and Stack-Up Selection
We review the required metal core, thermal conductivity, dielectric thickness, copper construction and finished-board thickness.
3. DFM and Thermal-Path Review
The engineering team checks circuit clearances, PTH isolation, copper balance, heat-spreading areas, machining requirements and manufacturability.
4. Prototype Fabrication
Prototype boards are manufactured for dimensional, assembly, electrical and thermal validation.
5. Inspection and Verification
Inspection can include AOI, electrical testing, flying probe, dimensional inspection and microsection analysis according to the project requirements.
6. Pilot and Volume Production
After the prototype is approved, the manufacturing documentation is controlled for low-volume, pilot-run or volume production.
Applications of Aluminum and Metal Core PCBs
LED Lighting
Aluminum PCB is widely used to transfer heat away from LED packages in:
- Automotive lighting
- Street lighting
- Industrial lighting
- Architectural lighting
- High-bay lighting
- Display systems
Automotive and EV Electronics
Metal core PCB structures support thermally demanding automotive applications such as:
- Power-control units
- Battery-management systems
- DC/DC converters
- On-board chargers
- Automotive lighting
- Electric pumps and motor drives
- Thermal-management controllers
Power Electronics
MCPCBs can support high-power devices used in:
- Power converters
- Inverters
- Rectifiers
- Solid-state relays
- MOSFET and IGBT modules
- Power supplies
- Charging systems
Industrial Automation
Industrial metal core PCB applications include:
- Servo drives
- Variable-frequency drives
- Motor controllers
- Robotics
- Industrial power modules
- Factory automation equipment
- High-current control systems
Medical and Precision Electronics
Metal core PCB may be used in equipment requiring controlled heat transfer, stable operation and compact packaging.
Each medical or precision project is reviewed according to its electrical, thermal, documentation and reliability requirements.
Communication and High-Power Electronic Systems
Hybrid metal-backed structures can support projects combining signal circuitry with localized power and heat generation.
Quality Control for Metal Core PCBs
Metal core PCB quality requires more than checking the finished board appearance.
Depending on the board structure and project requirements, verification can include:
- Incoming material identification
- Copper and dielectric thickness control
- Lamination parameter control
- AOI
- Hole-wall inspection
- Electrical continuity testing
- Flying-probe testing
- Dimensional inspection
- Routing and profile inspection
- Surface-finish inspection
- Microsection analysis
- Solderability testing
- Thermal conductivity or material verification
- Lot and production traceability
Inspection plans are defined according to board complexity, application and customer specifications.
Why Choose AEGIS for Aluminum and Metal Core PCB Manufacturing?
Metal-Core Material Expertise
AEGIS supports aluminum and copper-core thermal-management materials with thermal conductivity options from 1.0 to 6.0 W/mK.
Material and PCB Manufacturing Support
Our teams can support both metal-core material selection and finished-board fabrication, reducing the technical handoff between substrate sourcing and PCB manufacturing.
Engineering-Led DFM Review
We evaluate material, stack-up, copper construction, plated holes, machining and thermal-path requirements before production.
Standard and Advanced MCPCB Structures
Support ranges from conventional single-sided aluminum PCB to double-sided, hybrid and multilayer metal core constructions by engineering review.
Prototype-to-Production Continuity
The same controlled project documentation can support prototypes, pilot builds and volume manufacturing.
Global Project Support
AEGIS works with international engineering, OEM and sourcing teams in automotive, EV, power, industrial, medical, communication and lighting markets.
What to Send for an Accurate Quote
Please provide:
- Gerber or ODB++ files
- NC drill files
- Board drawing
- Required stack-up
- Aluminum or copper-core preference
- Required thermal conductivity
- Dielectric thickness if specified
- Finished-board thickness
- Copper weight
- Surface finish
- Solder-mask color
- Mechanical features
- Operating voltage
- Thermal target or component heat data
- Prototype quantity
- Production quantity
- Required delivery schedule
- Applicable inspection or quality requirements
When the material has not yet been selected, include the application, component power and thermal constraints so our engineers can recommend a suitable material path.
Frequently Asked Questions
Metal core PCB is the broader product category. An aluminum PCB is an MCPCB that uses aluminum as its metal substrate. Metal core PCBs can also use copper or other engineered metal structures.
MCPCB stands for metal core printed circuit board. It uses a metal substrate to spread and transfer heat away from power-generating components.
AEGIS supports metal-core material options from 1.0 to 6.0 W/mK. The appropriate value depends on dielectric thickness, insulation requirements, component power and the complete thermal design.
Not necessarily. Copper provides stronger bulk heat spreading but is heavier and more expensive. Aluminum is often the more practical option when the design requires a balance of thermal performance, weight and cost.
Yes, double-sided and plated-through-hole metal core PCB constructions can be evaluated. PTH insulation, core clearance, board thickness and hole structure must be reviewed before production.
Multilayer and hybrid metal core PCB structures are available by engineering review. The feasibility depends on layer count, metal-core location, via structure, dielectric system and thermal requirements.
Standard and heavy-copper constructions can be evaluated according to current capacity, copper distribution, etching requirements and thermal design.
Available finishes can include lead-free HASL, ENIG, OSP, immersion silver, immersion tin and other project-specific finishes.
Yes. AEGIS supports prototype, pilot-run, low-volume and volume metal core PCB manufacturing.
Do not select thermal conductivity based only on the highest published number. The dielectric thickness, electrical insulation, copper area, component footprint, interface and heat-sink design should all be considered.
Build a More Reliable Thermal Path
Send us your Gerber files, stack-up and thermal requirements for an engineering review.
AEGIS can help evaluate the metal-core material, dielectric construction, copper design and manufacturing process required to move your aluminum or metal core PCB from prototype to repeatable production.