Rigid-Flex PCB
Complex 3D interconnect solutions combining the reliability of rigid PCBs with the flexibility of flex circuits.
From wearable devices to automotive systems. 40+ years manufacturing heritage since 1982.
Complex 3D interconnect solutions combining the reliability of rigid PCBs with the flexibility of flex circuits.
From wearable devices to automotive systems. 40+ years manufacturing heritage since 1982.





Rigid-flex boards integrate multiple materials with different thermal expansion properties, making material selection critical for reliability. The flexible polyimide sections must withstand repeated bending without cracking, while rigid FR4 sections provide structural stability. Using adhesive-based polyimide with standard FR4 can cause CTE mismatch and delamination at transitions — a common failure mode in automotive applications. Choosing adhesiveless polyimide with high-TG FR4 ensures dimensional stability and prevents stress concentration at rigid-flex interfaces. For dynamic flex applications like foldable phones and wearables, adhesiveless materials are non-negotiable for achieving 100,000+ bend cycles.
| Parameter | Specification | Parameter | Specification |
|---|---|---|---|
| LAYER COUNT & BOARD THICKNESS | |||
| Layer Count | 2 – 24 layers standard; up to 32 layers for advanced projects | Board Thickness (Flex) | Structure-dependent |
| Board Thickness (Rigid) | 0.30mm – 5.0mm overall finished thickness | Max Board Size | 700mm × 480mm |
| FINE LINE & DRILL CAPABILITIES | |||
| Min Line/Space (Inner) | 50 / 50μm | Min Line/Space (Outer) | 62.5 / 62.5μm |
| Min Mechanical Drill | 0.15mm | Through-Hole Aspect Ratio | Up to 20:1 |
| Laser Drill | 0.075mm | Via Types | Blind, Buried, Via-in-Pad, Stacked |
| FLEX MATERIALS & COPPER | |||
| Flex Core Material | Polyimide (PI) – Adhesiveless & Adhesive-based | Flex Thickness Options | 0.5 mil, 1 mil, 2 mil (12.5μm, 25μm, 50μm) |
| Proprietary Copper Foil | Ultra-low roughness calendered/forged AEGIS proprietary | Bend Radius / Flex Life | Stack-up, bend radius, copper type, and test-condition dependent |
| Copper Weight (Inner/Outer) | Up to 3 oz finished copper | Surface Finish | ENIG, ENEPIG, Immersion Silver, Immersion Tin, OSP, HASL |
| AEGIS Material | Type | Dk @ 10GHz | Df @ 10GHz | Best for Rigid-Flex | Industry Reference | AEGIS Advantage |
|---|---|---|---|---|---|---|
| PTFE ULTRA-LOW LOSS — FOR MMWAVE RADAR & SATELLITE RIGID SECTIONS | ||||||
| AEGISAG-RF-S06-220 | PTFE + Short Glass Fiber | 2.20 | 0.0008 | Broadband antennas, satellite communications, military radar | RO3003 | Lower Df (0.0008) |
| AEGISAG-RF-S07-294 | Pure PTFE + Ceramic (No Glass) | 2.94 | 0.0010 | Phased array antennas, early warning radar, satellite navigation | RO3003 | Aerospace-grade, glass-free |
| HYDROCARBON CERAMIC — COST-EFFECTIVE 5G & AUTOMOTIVE RIGID SECTIONS | ||||||
| AEGISAG-RF-S08-338 | Hydrocarbon + Ceramic + Glass | 3.38 | 0.0029 | 5G base station antennas, radar sensors, power amplifiers | RO4003C | Cost-effective solution |
| AEGISAG-RF-S08-350 | Hydrocarbon + Ceramic + Glass | 3.48 | 0.0040 | 24GHz automotive radar, commercial RF, satellite LNB | RO4350B | Cost-effective solution |
| AEGISAG-RF-S08-615 | Hydrocarbon + Ceramic + Glass | 6.15 | 0.0038 | High-density interconnects, miniaturized RF modules | RO3010 | Higher Dk for size reduction |
Rigid-flex PCBs enable three-dimensional packaging solutions that traditional boards cannot achieve. From foldable smartphones requiring 200,000+ fold cycles to automotive cameras enduring extreme vibration, these boards eliminate connectors and reduce assembly complexity by 40-60%. As device form factors shrink and reliability requirements increase, rigid-flex technology has become essential for applications demanding both space efficiency and mechanical durability.

Smartwatches, fitness trackers, medical wearables, health monitoring patches

ADAS camera modules, infotainment systems, sensor assemblies, lighting control

Portable diagnostic equipment, implantable devices, surgical tools, patient monitoring

Foldable phones, tablets, laptops, compact cameras, gaming controllers

Robotics, automation controllers, industrial IoT sensors, handheld devices

5G small cell modules, antenna feed networks, base station control cards

Avionics control panels, satellite subsystems, military radio equipment
Rigid-flex PCB manufacturing requires careful control of stack-up design, material selection, lamination, flexible area layout, drilling, plating, coverlay, stiffener bonding, and final inspection. Aegis supports rigid-flex PCB manufacturing through qualified production facilities, covering multilayer rigid-flex structures, HDI rigid-flex designs, controlled impedance requirements, and high-reliability applications. Our engineering review can help evaluate bend radius, flex layer design, copper thickness, via placement, rigid-to-flex transition areas, stiffener position, material compatibility, and testing requirements before production.
Learn from real-world failures we’ve seen in 40+ years of PCB manufacturing. Avoid these costly errors.
Problem: Copper traces placed away from neutral axis experience tensile/compressive stress during bending.
Impact: Smartwatch failed after 10,000 bend cycles because signal traces were on outer surface, causing fatigue cracks.
Root Cause: Traces away from neutral axis accumulate stress with each flex cycle, leading to micro-cracks.
Solution: Redesign layer stackup to place critical traces on neutral axis + symmetrical stackup + adhesiveless polyimide.
Problem: Using minimum theoretical bend radius without accounting for manufacturing tolerances.
Impact: Medical device probe with 0.8mm bend radius cracked during assembly, causing 100% scrap.
Root Cause: Minimum bend radius assumes perfect conditions. Real-world tolerances create stress concentration points.
Solution: Increase to 1.5mm (50% margin) + stress relief curves + bend relief notches.
Problem: Sharp corners, copper crossing transition line, no relief cuts cause delamination.
Impact: Foldable phone failed at transitions after 5,000 fold cycles, causing screen malfunction.
Root Cause: Stress concentrates at sharp corners and copper crossing rigid-flex interface, causing peeling.
Solution: Use 3mm radiused corners + bend relief notches + copper stops 2mm before transition.
Problem: Standard FR4 + polyimide causes CTE mismatch in automotive high-temp environments.
Impact: Automotive infotainment board failed at 85°C ambient due to delamination at rigid-flex interfaces.
Root Cause: Different CTE (Coefficient of Thermal Expansion) between materials creates stress during thermal cycling.
Solution: Use High-TG FR4 (Tg 170°C) + adhesiveless flex + 100% thermal cycling testing.
Real projects delivered. See how rigid-flex PCBs enabled innovative product designs.
Specs: 8 layers, 0.4mm flex thickness, 200K+ cycles, 1.2mm bend radius
Challenge: Dynamic flex application — needed 200,000+ fold cycles with zero signal degradation. Previous supplier failed at 5,000 cycles.
Solution: Adhesiveless polyimide + neutral axis trace placement + 3mm radiused corners + bend relief notches.
Results: 200,000+ cycles validated · 98.5% yield · “Only supplier to pass our cycle test.”
Specs: 6 layers, 2.5mm flex width, static flex, ISO 13485 medical
Challenge: Ultra-miniature probe — 2.5mm width with HD video, LED illumination, and sensor integration. 100% scrap with previous supplier.
Solution: Microvia technology (0.10mm) + 2-layer flex section + medical-grade polyimide + 100% X-ray inspection.
Results: Zero defects on 5K+ shipment · 99.1% yield · FDA approval achieved · Multi-year contract.
Specs: 10 layers, -55°C to +125°C, high-vibration, MIL-STD-202
Challenge: Extreme environment — high vibration, thermal cycling, and moisture. Previous boards delaminated after 50 flight hours.
Solution: High-TG FR4 (Tg 180°C) + adhesiveless flex + conformal coating + strain relief at connectors + 100% thermal cycling test.
Results: 1,000+ thermal cycles passed · 500+ flight hours · Zero field failures · Qualified for military contract.
Will your flex section bend once (static) or repeatedly (dynamic)? This decision affects materials, bend radius, and cost.
Definition: Bent once during installation, remains in position for product lifetime.
| Bend Radius | 3-6× flex thickness |
| Materials | Adhesive-based acceptable |
| Trace Placement | Preferred, not critical |
| Flex Life | 10-100 cycles |
| Cost | Lower |
Definition: Bends repeatedly during product use — thousands to millions of cycles.
| Bend Radius | 10-20× + 50% margin |
| Materials | Adhesiveless required |
| Trace Placement | Neutral axis mandatory |
| Coverlay | Recommended (abrasion) |
| Testing | Bend cycle testing |
AEGIS PCB welcomes customer factory audits and third-party site verification at our IATF 16949 and ISO 9001-certified manufacturing facilities.
Verify our rigid-flex manufacturing capabilities with an on-site visit or virtual tour.
Advanced manufacturing and testing capabilities — from plasma desmear and PTFE lamination to bend-cycle validation and thermal cycling qualification.
Expert answers to common questions about rigid-flex PCB design, bend radius, neutral axis, and static
vs dynamic flex applications.